P/N: ETI0003-1175 30 Amp Power Distribution Unit (PDU) NSN: 6110-01-526-0503

Part Number:
NSN: 6110-01-526-0503
Rugged Rackmount Power Distribution Unit

US Navy / Raytheon LPD-17 Standard Product
Ultra Compact Rugged Power
30 Amp Rugged Rack Mount PDU w/ 4 Circuit, 2 Pole,
with EMI Filter and Surge Suppression

<br />ETI0003-K PDU Front View

ETI0003-K/30/120 Standard Front Panel Layout

ETI0003-K/30/120 Standard Rear Panel Layout

The field proven Rugged Systems™ Power Distribution Unit (PDU) line is ideally suited for military, industrial and telecommunicationsapplications requiring a rugged rack, vehicular or field deployable, high reliability, compact sizeand light weight design. The heavy-duty chassis occupies only 1U (1.75”) ofrack space while controlling up to 3600 VA of power via four double polecontrols. Therounded metal corners aid in safehandling. Internally, all major components are well secured and electricallyinsulated to prevent damage due to shock and vibration. All controlsand protective devices are brought to the front panel with critical switches orbreakers guarded to preventdamage or accidental operation. 

The double pole inputbreaker provides overload and short circuit protection for the whole unit. The PDU allows control ofthe individual output circuits. Theoptional Emergency Power Off (EPO) function can remotely open the input circuit breaker. Eachload is controlled and protected by a double pole shock rated circuit breakersavoiding accidentaloperation due to shock or vibration. The indicator arrays keep the operator informed as to the unit's status.The elapsed time hour meter tracks therack equipment operation for maintenance. 

Therear panel provides locking connectors for the input power, output power and fanpower. The combination MS input connector and input EMI/RFI filter providessuppression of conducted EMI. The transient surge suppression helps further protect the connected equipment.

Overall, the Rugged Power product line is uniquely qualified for critical shipboard,vehicle, airborne or land based systems combining advanced modular designfeatures with highly reliable construction.

Technical Specifications:
NSN: 6110-01-526-0503

PDU input from rack: 120 VAC nominal, optional up to 600 VAC
INPUT MAIN (J1) connection: MS3102E20-19P, 3 pin locking
Input control/protection: Guarded 2 pole, 30 amp circuit breaker
Input power indicator: Green neon lamp
PDU output to fans: Same as input from rack
AC TO FANS (J4) connection: NEMA 5-15R with cable locking bale
PDU output voltage to loads: Same as input from rack
Output rating to loads: Limited to lesser of 15 amps or 30 amps total
Output circuits: Four controlled outputs w/2 pole circuit breakers
LOADs (J5-J8) NEMA 5-15R with cable locking bale
Dimensions ( H x D x W ): 1.75 (1U) x 14.9 x 19.0 in (44x378x483mm)
Rack Slide Mount Patterns: Slides or rear support mounting brackets
Alternate Mounting Options: Table, Wall, Floor, Portable, Horizontal/Vertical
Shipping weight: 20 lb. (9.1 kg) with lift handles front
Audible noise: Less than 47 dB @ 5.0 ft., ANSI "A" scale
Cooling type: Convection cooling
Storage temperature: -13° to 140° F ambient (-25° to 60° C )
Operating temperature: 32° to 122° F ambient (0° to 50° C ), higher optional
Operating humidity: 0 to 95% relative humidity (non-condensing)
Operating elevation: Up to 15,000 ft (4,572 m), higher optionally
United States: Meets UL-1778 standard,
MIL STDs 901, 167 & 1399 Shock/Vib/Electrical
Canada: CSA C22.2 No. 107 safety requirements
EMI Protection: EMI/RFI FCC, Class B, MIL STDs 461
  Dual Source Input, Emergency Power Off, EMI Insertion Loss Filters, Auxiliary DC Power Supply, MS Connectors, Transient Surge Suppression, Load Sequencing

This page was last modified on:March 18, 2012

Request Product Information
*(denotes required field)
Contact ETI by mail at:
Energy Technologies, Inc.
219 Park Avenue East
Mansfield, OH 44902-1845

Contact ETI by phone or fax:
Voice: 419-522-4444
FAX: 419-522-4466